据说这是微软的一道面试题,谁知道呢。

问题描述:找出二叉树上任意两个指定结点的最近共同父结点(LCA,Least Common Ancestor)。

这算不上是一道算法题了,主要还是看数据结构基本知识和编程能力。

有父指针,方法一

首先考虑最简单的情况——二叉树结点数据结构中有父指针。

这是不是非常简单呢?只要分别从两个结点出发向上走到树根,得到两个结点的分支路径,求出这两条路径相互重合部分的最靠下的结点,就是所求的 LCA。这只需要 O(h) 的时空代价(设 h 是树高,n 是树结点数目,平均情况下 h = log(n),最坏情况 h = n)。

如果想再稍微节省一点儿时间和空间,可以先找出第一条分支路径,并用这些结点建立哈希表,然后从另外一个指定结点开始向上走到树根,每次遇到一个结点就到哈希表中查一下,一旦发现某个结点存在于哈希表中,这个结点就是所求的 LCA。这个方法的代码示意如下:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
def FindLCA(node1, node2):
  # Special cases.
  if not node1 or not node2:
    return None
  if node1 is node2:
    return node1

  # Get the first branch path.
  ancestors1 = set()
  while node1:
    ancestors1.add(node1)
    node1 = node1.parent

  # Check if any ancestor of node2 is in the first branch path.
  while node2:
    if node2 in ancestors1:
      return node2    # Got it, the LCA.
    node2 = node2.parent

  # These two nodes have no common ancestor.
  return None

时间和空间复杂度都是 O(h)。

有父指针,方法二(2012-04-02 22:10 添加)

上面的方法需要至少一个跟深度相当的缓存,在空间上还是有一些浪费的。可以使用更节省空间的方法,就是先计算出两个结点各自的深度,如果深度不同,则将较靠下的一个结点拉上去,直到两个结点在同一深度处。然后同步向根结点前进,首次相遇时则为最小公共祖先。示意代码(python 2.7)如下:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
def FindLCA(node1, node2):
  # Special cases.
  if not node1 or not node2:
    return None
  if node1 is node2:
    return node1

  # Gets each node's depth.
  depth = lambda node: depth(node.parent) + 1 if node else 0
  depth1 = depth(node1)
  depth2 = depth(node2)

  # Pulls up the lower node and makes the two nodes in the same depth.
  mindepth = min(depth1, depth2)
  for i in xrange(depth1 - mindepth): node1 = node1.parent
  for i in xrange(depth2 - mindepth): node2 = node2.parent

  # Finds the common ancestor.
  while node1 and node2:
    if node1 is node2: return node1
    node1 = node1.parent
    node2 = node2.parent

  return None

这样时间复杂度是 O(h),空间复杂度是 O(1)。

没有父指针,方法一

通常二叉树结点中并没有父结点指针,这时候就要遍历二叉树找到这两个结点,并找出它们的 LCA。

在遍历二叉树的时候,很容易就能够记录下根结点到任何结点的分支路径,只要有了分支路径,就可以对比找出 LCA。

我们采取前序遍历,即 N-L-R 的顺序,使用堆栈来避免递归并且记录完整的分支路径。那么,在二叉树中查找指定结点的算法可以这样写:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
class Dir:
  (Undef, Left, Right) = range(3)

def FindNodes(root, nodeSet, findAll=True):
  if not root or not nodeSet:
    return None

  pathDict = {}
  path = []
  curr = root
  while curr or path:
    while curr:   # Go down along left branch
      path.append((curr, Dir.Left))
      if curr in nodeSet:
        pathDict[curr] = list(path)
        nodeSet.remove(curr)
        if not nodeSet or not findAll:
          return pathDict
      curr = curr.left
    (curr, dir) = path.pop()
    while dir == Dir.Right:   # Back from right branch
      if not path: return pathDict
      (curr, dir) = path.pop()
    path.append((curr, Dir.Right))  # Trun to right from left
    curr = curr.right

  return pathDict

其中 Dir 这个类相当于是一个枚举,用来定义当前的分支方向。FindNodes 除了需要二叉树根结点外,还需要一个待查找的结点集合。这个函数可以在二叉树中找到所有(或第一个)待查找结点的分支路径,并返回一个字典(结点 --> 路径)。

可以看出,FindNodes 函数按照前序顺序遍历整个二叉树,查找指定结点。每遇到一个结点,首先判断它是不是我们要找的,如果不是就沿着左边的分支下降到底,然后转入右侧分支。

有了 FindNodes 函数的支持,我们就可改写前面的 FindLCA 函数,即先遍历二叉树求出两个结点的分支路径,然后比较这两条路径找出 LCA:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
def FindLCA(root, node1, node2):
  # Special cases.
  if not root or not node1 or not node2:
    return None
  if node1 is node2:
    return node1

  # Try to find the two nodes in the tree, and get their branch paths.
  nodeSet = set([node1, node2])
  pathDict = FindNodes(root, nodeSet)
  if nodeSet:
    return None

  path1 = [i[0] for i in pathDict[node1]]
  path2 = [i[0] for i in pathDict[node2]]

  # Compare the two paths, find out the LCA.
  lca = None
  minLen = min(len(path1), len(path2))
  for i in xrange(minLen):
    if path1[i] is not path2[i]:
      break
    lca = path1[i]

  return lca

遍历二叉树查找所有指定的结点需要 O(n) 时间,O(h) 额外空间;对比两条分支路径需要 O(h) 的时间,因此总的时间代价为 O(n),空间代价为 O(h)。

没有父结点,方法二(2012-04-05 23:31 更新)

上面的代码有点儿太啰嗦了,如果不想缓存整条分支路径,或者只是想让代码更简洁一些,也很容易做到,只需要在遍历查找的时候做点儿小小的改动。关于遍历二叉树可以参考后面的一篇文章:程序基本功之遍历二叉树。这里我将在非递归的前序(N-L-R)遍历基础上修改得到求 LCA 的程序。

为什么用前序遍历?

首先考察一下 LCA 的特性,只有两种可能:

  1. LCA 就是其中的一个结点,而另一个结点是它的子孙;
  2. 两个结点分别位于 LCA 的左子树和右子树中。

对于第一种可能,前序遍历时首先找到的结点就是 LCA,剩下的事情就是确定第二个结点在它下面。中序和后序也都可以做,但没有这么美妙。

对于第二种可能,假设在前序遍历过程中,首先找到了一个结点(比如下面的 H),根据非递归前序遍历的算法特性,这时候栈里一定是依次存储了结点 A(根节点)、B、D、G(请自行思考为什么没有 C、E、F),再结合 LCA 的特性,很容易发现,LCA 要么是 H 自身(对应于上面第一种情况),要么就只能是 A、B、D 或 G。剩下的事情就太美妙,继续遍历二叉树,直到找到另外一个结点。这时候看看 A、B、D、G 和 H 中还有谁在栈里,最靠下的那个就是 LCA。怎么判定谁在栈里?怎么判定最靠下?用辅助变量呗。

    A
   /
  B
 /
C
 \
  D
 /
E
 \
  F
   \
    G
   /
  H

示意程序代码:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
def FindLCA(root, node1, node2):
  nodeset = set([node1, node2])   # Also supports 3 or more nodes.
  s = []          # A stack to help performing N-L-R traversing.
  lca = None      # Records the most possible least common ancestor.
  mindepth = -1   # The depth of lca.
  while root or s:
    if root:
      if root in nodeset:
        nodeset.remove(root)
        if mindepth < 0:
          # Yeah, found the first node. The lca must be itself or already in s.
          lca = root
          mindepth = len(s)
        if not nodeset:
          break
      s.append(root)
      root = root.left
    else:
      root = s.pop()
      if mindepth > len(s):
        lca = root
        mindepth = len(s)
      root = root.right
  return None if nodeset else lca

可以跟 程序基本功之遍历二叉树 中的 非递归前序遍历 的程序对比一下,会发现改动之处是非常小的。

这段程序时间复杂度都是 O(n),空间复杂度是 O(h),这些都是遍历二叉树所需的时间和空间消耗。在遍历之外,就只剩下常数量的时空开销了。

Like this post? Share on: TwitterFacebookEmail

Comments

So what do you think? Did I miss something? Is any part unclear? Leave your comments below.

comments powered by Disqus

Keep Reading


Published

Last Updated

Category

算法

Tags

Stay in Touch